Commercial Industrial Finishing Equipment by Slocum Equipment, Inc.


	www.slocumequipment.com	888.310.2680

LS Industries Airless steel shot blasting system with 36" wide x 72" tall material feed envelope.

Description:
LS Industries model STRB3672 automated pass through airless steel shot blaster. This machine is designed to blast clean the exterior surfaces of a continuous flow of structural steel shapes using steel shot as an abrasive media.

• Main blast cabinet constructed from 1/4" manganese alloy.
• Replaceable 3/8"manganese wear plate liner in all areas of direct abrasive impact.
• Four (4) LS TurboShot™ impeller wheels; two overhead, two underthrow.
• Each LS TurboShot™ impeller driven by a Balder TEFC 20 HP motor.
• Each impeller equipped with eight replaceable impeller blades. Impellers enclosed in wheelhouses lined with replaceable wear plate.
• Sealed 2" impeller bearings provide superior resistance to abrasive impingement. Abrasive feed system including augers, collection hoppers, and a bucket elevator to feed abrasive to the upper wheels. .. Customer supplied monorail.
• 96" to bottom of part.
• Vestibules constructed from 10 ga. steel on either end of the blast cabinet are equipped with seals to prevent the escape of abrasive.
• Catch auger extends 96" from the exit end of the blast cabinet to return abrasive to the blast cabinet.
• Access door allows entry to blast cabinet for inspection and maintenance.
• Access panels allow inspection and maintenance of auger and elevator mechanisms. o Electrical box 1 control panel positioned on blast cabinet.
• Single point electrical hook-up. o Wired for 3/440/60 power.
• NEMA 12 electrical enclosures.
• Cutler - Hammer high voltage components used throughout.
• Digital ammeter allows monitoring of abrasive level within the blaster during operation.
• 20 horsepower jet pulse, cartridge dust collector.
• Full load of abrasive media is provided.
• Operations manual, maintenance guide, and wiring diagram is included.
• Lifting hooks allow easy unloading of the blaster.
• Estimated full load amp draw: 150
• Bucket elevator is 7.5 horsepower.

Asking Price:
The asking price on this equipment is $75,000.00
The asking price does not include the cost to ship the item or in the case of larger equipment, to disassemble it/ assemble it, or load it onto a truck(s).

Equipment Location:
Pennsylvania

Equipment Item Number: 381

Equipment Purchase / Information Request

Counter Offers:
If you have a different price in mind then you are welcome to make a counter offer here.

Assembly/Disassembly/Freight:
If you would like us to provide you with a free estimates for freight or rigging services you can request a free quote here now. Please specify the type of services you require.

Used Equipment Terms:
The information above is deemed reliable but not certified. The above consists of used goods and are sold "AS IS", without express warranties by Seller or implied warranties of any nature whatsoever, including but not limited to merchantability and/or fitness for a particular purpose. Any inspections of the goods made by Seller have not been made for the purpose of providing representations as to quality and safety. Due to the nature of the goods offered, Buyer is encouraged to make a thorough inspection prior to the time of transfer, and to consult the individual manufacturer and manufacturer's guides as to operating instructions for the goods.

Payment Terms:
100% of the equipment cost plus any freight charges prior to shipment. Cancellation of this agreement prior to shipment will result in the forfeits any and all sums paid by the buyer.

Forms of Payment Accepted:
Payments for Equipment, Freight & Services may be made by Company Check, Wire Transfer, or Credit Card. We accept Visa, Master Card and American Express.