Commercial Industrial Finishing Equipment by Slocum Equipment, Inc.


	www.slocumequipment.com	888.310.2680

6 Stage Powder Coating System

Description:
(1) Dual-Pass 6 Stage Stainless Steel Power Washer
(1) Dual-Pass Dry-Off Oven
(1) Two Zone Cure Oven
(3) Enclosed Track Conveyor Systems
(2) Powder Coating Booths
(with complete powder application equipment)
(2) Wet/Dry Booths On-Line and Oven

Click Here for Paint Line Drawing

Dual Line Six Stage Stainless Steel Washer & Iron Phosphate Pretreatment
Design Data:
Power: 480 Volts/ 3 Phase / 60Hz
Fuel: Natural Gas
Gas Pressure: 35” W.C Regulated Pressure
Dimensions: 10’6”W x 11’6”H x 125’L
Work Openings: 24”W x 66”H
Stage 1 Burner: 3,500,000 BTU/ HR
Stage 3 Burner: 3,500,000 BTU/ HR
Process Times @ 15 FPM Conveyor Speed
Entry Vestibule: 6’L

Stage 1 Cleaner: 13”L 60 Sec. @ 140 Degrees F.
Drain: 15’L
Stage 2 Drain: 8’L 30 Sec. @ Ambient Temperature
Drain: 15’L
Stage 3 Iron Phosphate: 15”L
Drain: 13”L
Stage 4 Rinse: 8’L
Drain: 13’L
Stage 5 Seal: 8’L
Drain: 1’L

R/O Halo: Dual Nozzle
Exit Vestibule: 13’
Total Length: 125’L

Conveyorized Overhead Dual Line Dry-Off Oven
Design Data:
Power: 480 Volts/ 3 Phase / 60Hz
Fuel: Natural Gas @ 8” W.C.
Oven Temperature: Nominal 300 Degree F.; Max 400 Degree F.
Work Opening: 24”W x 66”H
Approximate Outside Dimension: 10’W x 10’6”H x 86’L
Time In Dry-Off Oven: 7 Minutes / Pass
Dry-Off Oven Capacity: 3,500,000 BTU / HR
Dry Off Recirculation Motor: 40 HP
Dry-Off Fan Volume: 60,000 CFM
Dry-Off Exhaust Motor: 1 ½ HP
Dry-Off Exhaust Volume: 2,400 CFM

Conveyorized Overhead Two Zone Cure Oven (Bottom and Top Zone)
Design Data:
Power: 480 Volts/ 3 Phase / 60Hz
Fuel: Natural Gas @ 8” W.C.
Oven Temperature: Nominal 400 Degree F.; Max 400 Degree F.
Conveyor Speed: 15 FPM
Work Opening: 24”W x 66”H
Approximate Outside Dimension: 10’6”W x 18’6”H x 120’L
Time In Dry-Off Oven: 20-35 Minutes Top Zone / 20-35 Minutes Bottom Zone
Dry-Off Oven Capacity: 3,500,000 BTU / HR
Dry Off Recirculation Motor: 40 HP
Dry-Off Fan Volume: 60,000 CFM
Dry-Off Exhaust Motor: 1 ½ HP
Dry-Off Exhaust Volume: 2,400 CFM / Zone

Conveyors
(3) Enclosed Track Conveyor Systems
Caterpillar Drive Units with totally enclosed fan cooled motors (Each Conveyor System)
2 Lines have 1800’ of Track
1 Line has 400’ of Track
DigiLube Deluxe Conveyor Lubricator

Ultimate Quite Zone Powder Booth
(2) EPA Ultimate Booths
(8) Color Modules (2 / Color)
(8) Powder Sieves (2 / Color)
(2) Part Opening at Both Ends: 24”W x 66”H
(4) Auto Gun Slots (2 / Side): 30”W x 36”H

Exhaust Volume: 10,000 CFM 2 @ 5,000 CFM
Variable Speed Exhaust Motor: 2 @ 71/2 HP
(20) Primary Filters: 4,620 SQF
Cloth to Air Ratio: 10,000 / 4,260 = 2.16
Final Pre Filters: 90% - 95% Efficient
Booth Overall Length: 30’
Compressed Air: 100 PSI Clean, Dry, No Oil
Power Voltage: 480 Volts/ 1 Phase / 60Hz

Gema Powder Application Equipment
Design Data:
(2) Gema APS-10 Automatic Powder Application Systems
(1) Air Filter
(1) Fluidizing Pneumatic Control
(1) Stationary Control Panel
(1) Parts Instruction

Asking Price:
Call for Pricing
The asking price does not include the cost to ship the item or in the case of larger equipment, to disassemble it/ assemble it, or load it onto a truck(s).

Equipment Location:
Minnesota

Equipment Item Number: 489

Equipment Purchase / Information Request

Counter Offers:
If you have a different price in mind then you are welcome to make a counter offer here.

Assembly/Disassembly/Freight:
If you would like us to provide you with a free estimates for freight or rigging services you can request a free quote here now. Please specify the type of services you require.

Used Equipment Terms:
The information above is deemed reliable but not certified. The above consists of used goods and are sold "AS IS", without express warranties by Seller or implied warranties of any nature whatsoever, including but not limited to merchantability and/or fitness for a particular purpose. Any inspections of the goods made by Seller have not been made for the purpose of providing representations as to quality and safety. Due to the nature of the goods offered, Buyer is encouraged to make a thorough inspection prior to the time of transfer, and to consult the individual manufacturer and manufacturer's guides as to operating instructions for the goods.

Payment Terms:
100% of the equipment cost plus any freight charges prior to shipment. Cancellation of this agreement prior to shipment will result in the forfeits any and all sums paid by the buyer.

Forms of Payment Accepted:
Payments for Equipment, Freight & Services may be made by Company Check, Wire Transfer, or Credit Card. We accept Visa, Master Card and American Express.